EBARA Multigo
The EBARA Multigo is a vertical multistage centrifugal pump range suitable for pressure boosting in domestic, community & commercial water supply installations.
Applications
Typical installations include rainwater harvesting systems & pressurised water supply from cistern tanks.
Fountains and & presentation water features can also be fed with this pump as well as sprinkler irrigation supply systems of moderately-sized agricultural & garden areas.
Quality Components
The pump can be operated fully submerged or as a dry-standing pump suction & supply unit.
The motor is cooled by the liquid passing through the pump body (jacket-cooling) which allows silent operation when operating the pump as a non-submerged dry-standing installation.
The double mechanical seal with a chamber containing lubricating liquid ensures reliability and a prolonged service-life.
Versions
EBARA Multigo pumps are available in three-phase (400V) and single-phase (230V) (M) versions and have a maximum pumping capacity of 80 to 120 litres per minute.
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 0.95kW| P2= 0.60kW| I=1.9A Formerly: EBARA MULTIGO 40/08 Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 48.0 m | Q(max)=4.8 m³/h Submergence (max)=17 m Suction height (max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.00kW| P2= 0.60kW| I=4.3A Formerly: EBARA MULTIGO M40/08 Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 48.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.18kW| P2= 0.75kW| I=2.2A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 60.0 m | Q(max)=4.8 m³/h Submergence (max)=17 m Suction height (max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.22kW| P2= 0.90kW| I=2.3A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 49.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.33kW| P2= 0.90kW| I=2.4A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 72.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.25kW| P2= 0.75kW| I=5.7A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 60.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.33kW| P2= 0.90kW| I=6.4A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 49.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.42kW| P2= 0.90kW| I=6.8A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 72.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.52kW| P2= 1.10kW| I=3.1A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 62.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.55kW| P2= 1.10kW| I=3.0A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 84.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.62kW| P2= 1.10kW| I=7.5A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 62.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 230V|1Ph|50Hz| P1= 1.60kW| P2= 1.10kW| I=7.3A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 84.0 m | Q(max)=4.8 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com
Stainless steel submersible rainwater pump for clean water with 20m cable 400V|3Ph|50Hz| P1= 1.90kW| P2= 1.50kW| I=3.5A Vertical multistage pump for pressurised water-supply | suitable for rainwater harvesting-systems Submerged or non-submerged operation | IP 68 Insulation-Class: F | 2-pole T(max)=40°C Pump body, casing cover in stainless steel (CrNi-Steel 1.4301) External casing & motor casing in stainless steel (CrNi-steel 1.4301) Double mechanical seal (carbon/ceramic/NBR) with interpoised oil-chamber Impeller & diffuser in technopolymer Pump intake: 1¼“ (FT) | suitable for floating suction filter Discharge outlet: 1¼“ (FT) H(max)= 74.0 m | Q(max)=7.2 m³/h Submergence(max)=17 m Suction height(max)=6 m CE-certified | WEEE-vertified | Made in EU Manufacturer: EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy Phone: +39 0444 706811Email: ebara_pumps@ebaraeurope.comWeb: www.ebaraeurope.com