EBARA ECONTROL COMFORT 230V I | 4.0-6.3 A

Pump Control Panel for the operation of 1x pump | Duty Standby
230V | 1Ph | 50 Hz | max. P2: > 0.75 kW | A: 4.0 - 6.3 | IP 63
Dimensions: 318 x 267 x 167 mm
Automatic operation with connected Pressure-Switch or Float-Switch
Manual Pump Operation possible
Dry-Run Protection with connected Float-Switch (low level)
Motor-Protection; Overload Protection, Short Circuit Protection, Phase-Malfunction Protection
LED Display for Pump Operation and Alarm
Cable connections: 4 x M20 & 4 x M25
1x Alarm Input: via external switching device (optional; e.g. float-switch for high-level alarm)
1x Alarm Output: potential-free for BMS
1x Status (System OK) Output: potential-free for BMS
1x Alarm Output: 230V/4.0A for external Alarm (Buzzer, Light)
Lockable ON/OFF Switch
RESET Button
CE | WEEE | Made in Germany

Single Pump Control Panel in 230V with motor-protection and "duty standby" to automatically operate 1 pump (with a current rating of 4.0-6.3A).  The pump panel is used in sump chamber installations and water supply systems.

Sump Pump Control Panel | Duty Standby

A pump control panel with "duty standby" to automatically switch a submersible sump pump or water supply pump at wells or rainwater harvesting installations.

Applications:

• sump pump chambers; drainage sump chambers, wastewater pump chambers
• sewage pumping stations
• water supply from tanks or wells
• rainwater harvesting systems

Pump | Duty Standby | Pump Operation

The pumping cycle is activated when the contacts marked "Operation" are closed by an external switch such as a pressure switch or float switch. Once the contact is opened pump operation ceases. The external switch connected to the contacts "Operation" determines automatic pump operation via the control panel. It is necessary/mandatory to connect a pressure switch / float switch (additional accessory) to enable automatic pump operation.

Input Connections | Switching Voltage: 230V

• Pressure Switch / Float Switch; Operation
• Float Switch; Dry-Run Protection (Low Level Float Switch) - contacts bridged ex works
• Float Switch; High Level Alarm (High Level Float Switch); external fault - does not interrupt pump operation!

Alarms

• Motor-Protection; displayed via red LED & all alarm outputs
• Dry-Run Protection; displayed via red LED within the RESET-Button & all alarm outputs
• High Level Alarm (external fault); displayed via all alarm outputs

Output to Buidling Management System (BMS)

• Alarm Output: potential-free for BMS
• Status (System OK) Output: potential-free for BMS
  

Furthermore, the single pump control panel also has an alarm output in 230V (max. 4.0A) for an external optical or acoustic alarm (Buzzer, Light).