EBARA OPTIMA MS

Stainless Steel Submersible Pump for clear and waste water with 5m cable (H07RN8-F)
230V|1Ph|50Hz| P1=430W| P2=250W| I=1.9A
discharge outlet: 1¼“(FT)
with mechanical seal (carbon/ceramic/NBR)
T(max)=50°C
with automatic level control - vertical magnetic float-switch
for use in narrow chambers with level bottom surface (clear water)
hydraulics made from Thermoplast with high abrasion resistance
10 mm solids passage
H(max)=7.6 m | Q(max)=9.0 m³/h
Submergence(max)=2m
TÜV/GS-certified | WEEE-certified | Made in EU

The EBARA OPTIMA MS is a pump with internal float switch designed for installation in narrow chambers, where a standard external float switch would physically not be able operate.

A sump pump with internal float switch should not be used to disperse sludged-based media or discoloured water with high dirt saturation. While the pump itself is possibly less affected by this type of pumping media, deposits on the internal float-body may over time impact functionality and reliable pump operation.

In cases where a sump pump with internal float switch is nevertheless required in dirt saturated water, it is recommended to perfom regular service-checks and to provide cleaning of the internal float-body.

The pump has to operate sitting on a level bottom surface. Pumps with internal float switch should not be hung into the pump chamber. 

Manufacturer:  
EBARA Pumps Europe S.p.A., Via Torri di Confine 2/1 int. C, 36053 Gambellara (Vicenza), Italy 
Phone: +39 0444 706811
Email: ebara_pumps@ebaraeurope.com
Web: www.ebaraeurope.com