Float Switch 5m | Emptying | G

3x 1.0mm² cable (L-L1-PE) | Cable Type: HO7RN-F
Cable length: 5m | 3x core cable (L-L1-PE) with protective earth-conductor (PE)
10(6) A | 250 V | IP68
Function: emptying
Switching angle: ±45°
Material: non-toxic polypropylene
Dimensions (mm): 80.5 x 165 x 42
T(max.): 85°C
Certifications: VDE, ENEC, CE | Made in Germany

The float switch in the upward position closes the contact between L & L1. In the downward position the contact between L & L1 is opened.

Applications:

• level-controlled operation (ON/OFF) of a submersible pump in a sump chamber
• high level alarm in a sump chamber or tank
• pump dry-run protection; low-level device in a tank

The float switch activates the pump or high level alarm and can be used in wastewater pump stations, drainage sump chambers, sewage treatment plants and septic tanks.

Installed as a low-level device in a rainwater harvesting tank, the float switch can also provide pump dry-run protection.

Brown = L; phase/power supply

Blue = L1; to pump or alarm

Green/Yellow = PE (earth conductor)

SAFETY NOTICE: due to submerged operation, a float switch with earth conductor (PE) is recommended at any installation with up to 250V. All float switches supplied by GEMGATE Limited are equipped with an earth conductor!